Feature Codes


#1

FEATURE CODES


C-Vox Feature Codes


Access your voice mailbox: *97
Access another voice mailbox: *98. You will then be prompted to enter the voice mailbox number.
Login to extension: *11. You will then be prompted to enter the extension number and extension password. Note that you should log out of the extension first.
Logout of extension: *12
Milliwatt test: 1000. This is a handy call quality test. The tone should be smooth and unbroken.
Queue login: nnnn* where nnnn is the queue number
Queue logout: nnnn** where nnnn is the queue number
Group pickup: *8 (if enabled)
Blind transfer: ##. You will then be prompted to enter an extension number. Enter the number and then press #. The call will be immediately transferred.
Attended transfer: #0. You will then be prompted to enter an extension number. Enter the number and then press #. Once the other person answers you can hand the call over to them and then hang up.
Attended transfer disconnect: *0. If the other person doesn't answer you can dial this to get the call back and speak to the original caller.

Cisco Feature Codes


The following codes can be used to activate and deactivate various features on your phone or ATA

Call forward all activate: **72
Call forward all deactivate: **73
Call forward busy activate: **72
Call forward busy deactivate: **73
Call forward no answer activate: **92
Call forward no answer deactivate: **93
Call waiting activate: **56
Call waiting deactivate: **57
Do not disturb activate: **78
Do not disturb deactivate: **79

This information applies to the following device models when provisioned using Conversant setup scripts:

SPA1001
SPA2102
PAP2T
SPA3102
SPA301
SPA901
SPA112
SPA122